SAFECOAT SAFE SEAL

A multi-use, water-based, low-gloss sealer for highly porous surfaces such as particle board, plywood, processed wood, and porous concrete. Used primarily to reduce toxic outgassing, in particular it is highly effective at sealing in formaldehyde outgassing from processed wood such as plywood, particle board, and pressed wood. Safecoat Safe Seal is virtually odorless on application and odorless once cured. For interior use.

For use on porous surfaces such as processed wood products, concrete, wood, new drywall, grout, and plaster. May be added to grout and plaster to prevent outgassing and to add strength to the mix. Test surfaces first in inconspicuous areas to be sure product absorbs into surfaces completely. Excellent at controlling formaldehyde emissions of open faced and faced fiberglass batt insulation - simply fog spray surfaces. Safecoat Safe Seal improves the adhesion and bonding power of adhesives and coatings applied to treated surfaces. For example, apply a thin coat to the slab and bottom of tile, before laying adhesive (in this application no cure period is necessary; the adhesive may be applied while SafeSeal is still tacky).

Coverage is approximately 350 square feet per gallon per coat depending on surface porousness. Recommended 2 - 3 coats.

PRICES:

Qt. $13.00
Gallon $37.00